To ship a car overseas from Vancouver, you choose between a shipping container and a roll-on/roll-off (RoRo) vessel, gather your ownership papers, have the export reported to the Canada Border Services Agency (CBSA) with the car’s VIN at least 48 hours before it is loaded, and check what the destination country requires before you book. This guide explains each part of international vehicle shipping from Vancouver: the two shipping methods, the documents, the steps from quote to delivery, and what affects how long it takes.
Container or RoRo: two ways to ship a car overseas from Vancouver
Container shipping
Container shipping is the most common way to ship a car overseas from Vancouver. The vehicle is driven or loaded into a steel container, blocked and braced to the floor so it can’t move, and the container is sealed until it’s opened at destination.
- One car in a 20′ container: a single car fits with some room left over, and the whole container is yours.
- Two cars in a 40′ container: both sit on the floor, one behind the other.
- Three cars in a 40′ container: one car is lifted on a special racking frame so two can fit beneath it.
- Four cars in a 40′ container: possible with small cars, careful stacking and precise bracing, but not usually recommended.
- Shared (consolidated) containers: your car shares a container with other vehicles going to the same port, which splits the cost.
Containers protect against weather, salt spray and theft, and they are the usual choice for classic, luxury or modified cars. Depending on the carrier and the destination, you may also be able to send some declared personal items in the container. Learn more about shipping containers.
RoRo shipping
With RoRo shipping, the car is driven onto a specialized vehicle carrier, parked on an enclosed deck and secured, then driven off at the destination port. It can be good value for a running vehicle, and it suits oversized vehicles such as motorhomes, trucks and machinery that won’t fit in a container. RoRo services only call at certain ports, the car must be in running condition, and it generally has to be empty of personal belongings.
Motorcycles, boats and other vehicles
Motorcycles and ATVs are braced into a container with straps and blocks or packed in a custom crate for extra protection, and they can often share space with a car or household goods. Boats can be shipped on their trailers secured inside a container, held in a custom-built frame, or, for some hulls, rotated to fit. Larger boats may go on flat racks or RoRo. See boat shipping for details.
Documents for vehicle export from Canada
What the CBSA requires
When a car, motorcycle, boat or other vehicle is permanently exported from Canada to any country other than the United States, the export must be reported to the CBSA with an export declaration, filed through the Canadian Export Reporting System, quoting the vehicle identification number (VIN) or hull number. Unlike many other goods, permanently exported vehicles must be reported whatever their value. For ocean shipments, the declaration must be filed at least 48 hours before the vehicle is loaded onto the ship, and the CBSA can examine the vehicle at any time before it leaves. The details are in CBSA Memorandum D20-1-1, Exporter Reporting. Your forwarder can file the declaration for you, which is one reason to book early.
You may have heard of a 72-hour rule. That rule belongs to U.S. Customs and Border Protection and applies to vehicles exported from the United States, for example a car bought in the U.S. and shipped from a U.S. port. It doesn’t replace the Canadian reporting rules above.
What you’ll need to provide
- Original vehicle registration or ownership, with a VIN that matches the car
- Photo ID or passport, and your contact details at destination
- A lien release or lender’s letter if the car is financed or leased
- A bill of sale if you bought the car recently or are selling it
- The vehicle’s value, for the export declaration and insurance
- Any import permit, approval or compliance documents the destination country requires
Your forwarder issues the bill of lading, the contract of carriage that is also needed to release the car at destination.
Check the destination rules early
Every country has its own import rules. Some limit vehicle age, require emission or safety approvals, charge high duties and taxes, or offer relief to returning residents and people moving there. Australia and New Zealand require vehicles to be spotlessly clean of soil and plant material. Check these rules before you ship, because a car that can’t be registered at destination is an expensive mistake. Our destination pages, such as shipping to Europe, are a good starting point.
Steps in international vehicle shipping
- Request a quote: tell us the vehicle’s make, model and size, whether it runs, the destination and when you want it to go.
- Choose the method: container (sole use or shared) or RoRo, based on your car, budget and destination port.
- Collect the documents: ownership, ID, lien letter or bill of sale, and anything the destination requires.
- Arrange insurance: a carrier’s liability is limited, so transit insurance for the car’s full value is strongly recommended.
- Prepare the car: clean it, photograph it, lower the fuel, switch off alarms and remove loose items. Our car preparation checklist covers each step.
- Drop off or pickup: deliver the car to our warehouse or have it collected. Cars coming from elsewhere in Canada can reach Vancouver by truck or rail.
- Loading and export reporting: the car is loaded and braced into its container or delivered to the RoRo terminal, and the export declaration is filed with the CBSA before loading.
- Ocean transit: you receive the bill of lading and updates while the ship is at sea.
- Arrival and customs clearance: the car is cleared through destination customs and inspections, and duties and taxes are paid.
- Collection or delivery: you collect the car at the port or warehouse, or have it delivered.
What affects timing?
There’s no single transit time for international vehicle shipping. The main factors are:
- Destination and route: direct sailings are quicker than routes with a transshipment at another port.
- Sailing schedules: RoRo ships call less often than container ships on many routes, and shared containers leave once they’re full.
- Paperwork: missing ownership documents, liens or destination approvals are the most common cause of delay before the car even leaves.
- Export reporting: the declaration must be in at least 48 hours before loading, and a CBSA examination can add time.
- Destination clearance: customs, biosecurity or compliance inspections and any extra cleaning.
- Port congestion, weather and season: these are outside anyone’s control, so build in some flexibility.
Frequently asked questions
Is it better to ship a car overseas by container or RoRo?
A container gives more protection and may allow some personal items, so it suits valuable or non-running cars. RoRo can be good value for a running vehicle and is often the only option for oversized vehicles, but it only serves certain ports.
How far ahead should I report my vehicle export to the CBSA?
For ocean shipments, the export declaration must be filed at least 48 hours before the vehicle is loaded onto the ship. Your forwarder normally files it for you once your documents are in.
Can I ship a car that still has a loan on it?
Usually yes, but you’ll need written permission from the lender, and the car must be legally yours to export. Sort this out before booking.
Can I ship more than one vehicle together?
Yes. Two or three cars can share a 40′ container, and motorcycles or ATVs can often go in with a car. Sharing a container is one of the easiest ways to lower the cost per vehicle.
Planning to ship a car overseas from Vancouver? Request a vehicle shipping quote and we’ll recommend the best method and route for your car.







